YM-P1001C single phase phantom load power source is a new generation, high stability single phase energy meter calibration phantom load power source(three phase YM-P3001C). It uses the advanced technology and electronic components available in 90 decade. The instrument can generate sine-wave voltage/current and phantom power to drive single phase energy meter, usually it is the main part of energy meter test bench.
Technical Parameters
Power supply: 1P2W 220V±10%, 50Hz / 60Hz;
Max consumption: 400VA
Dimension: 480mm X 200mm X 450mm
Current source:
Output current: 1×0.01A - 1×100A
Adjusting resolution: 0.01% (min. 0.001A)
Power factor: -1.0 ~ 1.0(0~3600; resolution: 0.10)
Output frequency: 45Hz~65Hz;
THD(sine wave output): <0.8%
Stability of current during sine wave output:
0.05% (180s)
Output wave: sine wave
Output capacity: 30VA per meter position
Voltage source:
Output voltage: 1×30V - 1×300V
Load: The Load could be resistor / inductive / capacitive(<4uF)
Adjusting resolution: 0.01% (min. 0.1V)
Output frequency: 45Hz~65Hz;
THD (sine wave output): <0.8%
Stability of voltage during sine wave output:
0.05% (180s)
Output wave: sine wave
Output capacity: 15VA per meter position
Features
- Meter under testing: 1P2W
- Testing mode: active power, reactive power
- Test 3pcs or 2pcs meter synchronously
- Starting test and creeping test
- Reference standard and power source integrated, easy to carry.
- Measuring mechanical meter and electric meter
- Operating by manual keyboard or PC
- With shortcut key of normal test point, speed up testing
- Internal large capacity storage device for mass memory
- Local checking the testing result
- Overload, short circuit, open circuit protection
- With self-checking function
